特點及優勢
●點膠精度高：采用雙伺服電機驅動，偏心螺旋桿送料，使雙組份膠粘劑能夠連續穩定輸出
High dispensing accuracy: driven by dual servo motor, eccentric screw feeding, enabling continuous and stable output of two-component glue
●廣泛適用的膠體粘度及吐膠量：調節電機轉速和氣體壓力，可點涂不同粘度的膠體，并可快速改變吐膠量的大小
Widely applicable colloidal viscosity and glue amount: adjust motor speed and gas pressure, point jet glue with different viscosity, and quickly change the glue amount
●簡單可調的雙組份混合比：調節電機轉速，可快速改變兩種組份的混合比
Simple and adjustable two-component mixing ratio: adjust the motor speed to quickly change the mixing ratio of the two components
●定子適應性好：定子耐介質腐蝕，使用壽命長，大大降低用戶的綜合使用成本
Good adaptability of the stator: the stator is resistant to medium corrosion and has a long service life, which greatly reduces the user's comprehensive cost.
●容積式計量：真正的容積式輸送，流量不受壓力變化影響
Volumetric metering: true volumetric delivery, flow is not affected by pressure changes
●輸出壓力高：單泵輸出壓力20bar，雙泵輸出壓力可達40bar
High output pressure: single pump output pressure up to 20 bar, double pump output maximum pressure up to 40bar
雙組份螺桿泵技術參數2-Component Screw Pump Parameters
| 尺寸（長*寬*高）Dimensions (length * width * height) | 284.35mm x 184.6mm x 29mm |
| 產品型號 | Psv-flow600D |
| 重量Weight | 約2 kg |
| 接液部材質Wetted parts material | 不銹鋼/耐腐蝕復合材料stainless steel / corrosion resistant composite |
| 電機規格Motor specifications | 伺服電機servo motor |
| 電機轉速M(fèi)otor speed | 1~120 r/min |
| 進料口Inlet | NPT 1/8 |
| 輸入壓力Input pressure | 0~6bar |
| 輸出壓力Output pressure | 0~20bar |
| 工作環境Working environment | 0~40℃ |
| 適用膠體粘度Applicable colloidal viscosity | 0~1000,000 cps |
| 吐膠量Glue Spitting amount | 0.06 ml/r |
| 膠體流量Colloidal flow | 0.06~7.2 ml/min |
| 最小吐膠量Minimum glue amount | 00.005 ml |
| 精度Precision | ±1% |
| 自密封Self-sealing | 2 bar |
| 儲存條件Storage conditions | 干燥無塵dry and dustless，-10℃~+40℃ |
| 混合比Mixing ratio | 1:1~10:1 |
